Injection molding Die protection

Functional die protection improves tools and machines. X-SENSORS highly-sensitive sensors are appropriate in this application. Using a measuring amplifier, pressures on the order of one kilogram can be recorded, so that even the pressure in PET bottle molds can be monitored. By using two sensors, one in the upper and the other in the lower force path, collisions can be detected over the whole surface of the die set.

Strain sensor X-109-8
Wide measuring range

Strain sensor with M12 plug for high strains
Strain sensor for dynamic applications for limit value monitoring to avoid overloads. Force measurement via st...
0-775 µm/m | 88x27x20 mm | ± 10 V or 4-20 mA
With external input for automatic zero-point adjustments

Strain sensor X-113-8
Easy mounting with two screws

Strain sensor with M12 plug and cable outlet
Strain sensor for dynamic applications, with process tare Cyclic with analog signal path for fast response tim...
0-360 µm/m | 93x25x20.3 mm | ± 10 V or 4-20 mA
With external input for automatic zero-point adjustments