Universal measuring Amplifier

The measuring Amplifiers are suitable for universal signal conditioning of Force and Strain sensors with strain gauge full bridges. They are thus suitable for amplifying the mV/V sensor signal from Force and Strain Sensors to control inputs. Thanks to the compact housing, mounting can be carried out directly at the measuring point in a space-saving manner. This allows the strain gauge Sensor signal to be amplified into a robust standard signal (0-10 V or 4-20 mA) on the spot.


Measuring Amplifier X-219-IP03

Analogue Output 0-10 V und 4-20 mA | Robust plastic housing- 83x58x33mm | Zero point adjustment (installation tare) using an onboard potentiometer


Measuring Amplifier X-201-IN09

Analogue Output 0-10 V and 4-20 mA | Inline Housing - 89.6x36x30 mm | Inexpensive measuring amplifier
can be used for all applications


Measuring Amplifier for cyclic applications - Process-Tare

The zero point adjustment can be triggered via the control. If the reset input is pulled to >10 V, the signal is set to zero (reset) and the zero point adjustment has been performed. Zero adjustment on these Strain Sensors and Amplifiers is performed by a digital zero adjustment mechanism, where the zero correction is permanently stored during operation. It should be noted that the zero point must be relearned in the event of a power interruption.


Measuring Amplifier X-201-IP08

Analogue Output 0-10 V und 4-20 mA | Aluminium field housing - 115x65x40 | With analogue signal path | External zero point adjustment


Measuring Amplifier for static applications - Installation-Tare

The zero point adjustment can be triggered via the control. If the reset input is pulled to >10 V, the signal is set to zero (reset) and the zero point adjustment has been performed. Zero adjustment on these Strain Sensors or amplifiers is performed by a digital zero adjustment mechanism. The zero point adjustment is stored permanently, i.e. the zero point correction is available again even after switching off.


Measuring Amplifier X-201-IP07

Analog output 0-10 V and 4-20 mA | Aluminum field housing - 115x65x40 mm | Configurable measuring amplifier with captive zero point adjustment


Measuring Amplifier X-201-KA07

Analog output 0-10 V and 4-20 mA | Hat rail assembly - 75x45x35 mm | Configurable measuring amplifier with captive zero point adjustment