Display Unit X-325

especially suitable for visualization with strain gauge sensors

For the accurate display of measurement results

The X-325 is a completely portable measuring instrument for strain gauge Sensors in a small, robust IP65 housing weighing only 260 grams. The input range for the connected sensors is ± 5 mV/V.

For ease of use, the operator has access to six uniquely assigned buttons:

Gross / Net: Hide preloads and basic weights

Range: Switch between two measurement ranges (different scaling and unit)

Hold: Hold current measurement

Peak: Store peak value of a trace

Shunt Cal: Simulate resistance

Through: Store minimum value of a trace

Calibration and configuration can be done via a separate configuration menu using the buttons on the front panel. The configuration menu is very simple and allows setting a tare value, display resolution, filter rate, auto power off and low power mode selection.

  • Easy handling with only six push buttons
  • Fast switching between two measuring ranges, or scales
  • 7½-digit LCD display
  • Measurement rate of 10 Hz (display with up to 19200 Hz available on request)
  • Fast display of peak, minimum and gross/net readings
  • Easy configuration of tare, display resolution and measurement speed
  • Battery life of up to 450 hours
  • Auto-Sleep-Function
  • RS232 output available as option
  • TEDS compatible (IEEE 1451 – Template 33)


Data sheet X-325

How it works

There are 2 calibration options A self-calibration with live measurement values and an input of the sensor-specific sensitivity/sensitivity. Two separate ranges are available. This makes it easy to display two separate scales and units.

The X-325 Indicator has a power saving feature that can provide up to 450 hours of battery life with a 350 ohm strain gauge bridge. In normal power mode, up to 45 hours of battery life is achieved with a 350 ohm strain gauge bridge. It also includes an auto power off feature that can be set in 1 minute increments up to 99 minutes, or disabled.

Optionally, the X-325 Indicator is available with an RS232 output, a second sensor port, and a carrying case. In addition, the display can also be delivered preset, or calibrated with a suitable strain gauge Sensor.

Technische Daten

measuring range



Electrical connection


Contact us!

We are happy to answer your questions about our sensors and find a solution for your application.







    Your Message



    If you have any questions about our products, we are at your disposal.

    + 41 52 543 19 60

    Produkte vergleichen