Measurement of static loads

Measurement of static loads

S-Type Load Cell XTC

Area: 10-5000 kg
Size: depends on force range
Notes: highly accurate 0,1%

S-Type Load Cell XTC

Load cell with S-Type design for highly stable static force measurement with high output signal. For compression and tension force measurements.

Two internal threads for force application for measuring ranges from 10 kg to 5000 kg.

The S-shaped tension and compression force transducer is ideally suited for highly stable force measurement of static loads with a high output signal. Especially for weighing applications in the force range from 10 kg to 5 tons, this S-shaped force sensor is characterized by excellent linearity and stability.

The force application takes place via the two internal threads of the Type-S force sensor, so the load cell can be used both as a compression force sensor or as a tension force sensor.

The load cell can be professionally installed via the two internal threads. The solid steel housing and the Type-S design according to IP65 guarantee trouble-free operation of the force sensor, even under difficult environmental conditions.


  • S-Type design
  • Two internal threads for force application
  • Encapsulated design IP65
  • Measuring ranges from 10 kg to 5000 kg

Electrical connection 

The force sensors from X-Sensors are based on a strain gauge full bridge with strain gauges. The output signal of this sensor is specified in mV/V. Various input modules of controllers already allow the direct connection of force sensors with strain gauge full bridge.

Additionally, measuring amplifiers with voltage output (0-10 V) and current output (4-20 mA) are available, which amplify the strain gauge full bridges accordingly. The measuring amplifiers are available in a robust field housing or for DIN rail mounting. Brand new is the compact inline amplifier X-201-IN09 from X-Sensors, which can be used universally for static and cyclic measurements and offers an excellent price-performance ratio.


Mechanical connection / design  

The advantages of the S-shaped load cells are the compact design and easy handling. Both the compressive force and the tensile force can be measured.

The tension and compression force sensor is versatile and is used in container weighing, dosing technology, tension force measurement in wire or thread winders, test and analysis systems in industry, load monitoring in industrial plants and filling monitoring.

The mounting of the load cell is uncomplicated via the two internal threads.



Data sheet XTC


S-Type Load Cell XTC

Unverbindliche Anfrage stellen

Bitte senden Sie mir ein Angebot für folgendes Produkt: S-Type Load Cell XTC.

Ich beabsichtige dieses Produkt in folgender Anwendung einzusetzen:

This contact form is deactivated because you refused to accept Google reCaptcha service which is necessary to validate any messages sent by the form.

Schnellanfrage stellen

Schreiben Sie uns – Wir rufen Sie auch gerne zurück! Wir beantworten Ihnen gerne alle Fragen zu unseren Produkten.

    Ihr Name*

    Ihr Vorname*




    Ihre E-Mail*

    Ihre Nachricht

    Patrick Bernauer

    Patrick Bernauer

    Verkauf Endkunden / Distributoren
    Tel.: +41 52 543 19 66

    Bei Fragen zu unseren Produkten stehe ich Ihnen gerne zur Verfügung.
    +41 52 543 19 66

    Related products/accessories

    Strain gauge amplifier X-201-IN09
    Strain gauge amplifier

    Easy to operate, inexpensive to purchase - the new strain gauge measuring amplifiers from X-Sensors
    Analogue Output 0-10 V and 4-20 mA | Inline Housing - 89.6x36x30 mm | Inexpensive measuring amplifier
    can be used for all applications
    You need help for selecting the right sensor?
    Please get in touch with us!

      Your Name/Surname*


      Your E-Mail*

      Patrick Bernauer
      Sales & Technical Support

      Tel.: +41 52 543 19 66

      Your message

      Please call me back