Strain gauge amplifier

Strain gauge amplifier

Strain gauge amplifier X-201-IN09

Area: Analogue Output 0-10 V and 4-20 mA
Size: Inline Housing - 89.6x36x30 mm
Notes: Inexpensive measuring amplifier
can be used for all applications

Strain gauge amplifier X-201-IN09

Easy to operate, inexpensive to purchase – the new strain gauge measuring amplifiers from X-Sensors

  • Teaching of zero point with an external input for PLC connection or via an onboard-button
  • Zero correction is stored permanently also after a power-off
  • No limitation of the taring cycles

The new strain gauge amplifier from X-Sensors was developed for universal and easy commissioning. With this new generation, the zero point adjustment can be carried out using a button in the housing and by an input for PLC.

The zero point correction is always saved permanently. At the same time, there is no limitation of the taring cycles, which makes this strain gauge measuring amplifier a real universal device for all kind of applications.


The amplifiers of X-Sensors are suitable for the universal signal conditioning of strain gauges sensors. They are therefore suitable for amplifying the mV-sensor signal of any force and strain sensors and load cells. Thanks to the compact inline housing, the installation of the amplifier can be carried out directly at the measuring point to save space.

The measuring amplifiers are predestined for use of all kind of static and dynamic applications:

  • Dynamic application with fast and recurring force cycles (e.g. presses)
  • Weight measurement
  • Measurement of mechanical loads in structures
  • Limit value monitoring to avoid critical conditions in systems and structures

Zero point adjustment

The zero point adjustment for these amplifiers is performed by a digital zero point-adjustment mechanism. The zero point setting is stored permanently, the zero point correction is also available after a power-off event. Thus, a constantly available installation tare is available. The number of taring operations is unlimited.

The reset input does trigger a zero point adjustment by the PLC. It is available with an “Active Low” (< 3 V) and “Active High” (> 10 V) Logic.


3D CAD – X-201-IN09 with M12 connector

3D CAD – X-201-IN09 with two clamps for cable connection

Data sheet X-201-IN09

Strain gauge amplifier X-201-IN09

Unverbindliche Anfrage stellen

Bitte senden Sie mir ein Angebot für folgendes Produkt: Strain gauge amplifier X-201-IN09.

Ich beabsichtige dieses Produkt in folgender Anwendung einzusetzen:

This contact form is deactivated because you refused to accept Google reCaptcha service which is necessary to validate any messages sent by the form.

Schnellanfrage stellen

Schreiben Sie uns – Wir rufen Sie auch gerne zurück! Wir beantworten Ihnen gerne alle Fragen zu unseren Produkten.

    Ihr Name*

    Ihr Vorname*




    Ihre E-Mail*

    Ihre Nachricht

    Patrick Bernauer

    Patrick Bernauer

    Verkauf Endkunden / Distributoren
    Tel.: +41 52 543 19 66

    Bei Fragen zu unseren Produkten stehe ich Ihnen gerne zur Verfügung.
    +41 52 543 19 66

    More products

    You need help for selecting the right sensor?
    Please get in touch with us!

      Your Name/Surname*


      Your E-Mail*

      Patrick Bernauer
      Sales & Technical Support

      Tel.: +41 52 543 19 66

      Your message

      Please call me back