Strain ring X-105
Tie bar measuring system for measuring strain and force on cylinders and tie bars. Also suitable for measuring column strains. Simple mounting, also suitable for retrofitting.
- Universally applicable strain ring for force and strain measurements
- Easy mounting without complex surface treatment, also suitable for repeated installations
- Optional available with X-210 amplifier
- Easy to retrofit and ready for immediate use
The half-shells of the X-105 are simply clamped on a cylinder or tie bar. The strain gages are pressed directly to the cylinders by the mounting force, so that same measurement results in comparison with bonded strain gauges are achieved. After the installation, strains of up to 1000 μm/m can be measured.
The two half-shells can be connected directly to the measuring amplifier X-210-8-KA04 without an additional connection box or Y-cable. A digital control input is available on the measuring amplifier for cyclic zero-point adjustments in dynamic applications.
The strain ring X-105 is ideally suited for the measurement of strains in tie bars of presses and injection molding machines. The tensile and compressive forces can be determined indirectly by the measured strains.
We would be happy to help you choose the right sensor
and look forward to hearing from you!
Verkauf OEM,Key Account Manager
Tel.: +41 52 543 19 65
Verkauf Endkunden, Distributoren
Tel.: +41 52 543 19 66
Data sheet – Strain-Ring X-105Download
Strain sensor for indirect force measurement
Force measurement with strain sensors: X-Sensors offers a new strain sensor which has a "best in class" sensitivity of 3 mV/V at a nominal strain of 250 μm/m. mehr