Easy mounting with two screws

Easy mounting with two screws

Strain sensor X-113-8

Area: 0-360 µm/m
Size: 93x25x20.3
Notes: ± 10 V or 4-20 mA
With external input for automatic zero-point adjustments

Strain sensor X-113-8

Strain sensor for dynamic applications, with process tare Cyclic with analog signal path for fast response time. Ideally suited for force measurements on presses and injection molding machines.

  • Analogue signal path with fast response time
  • For dynamic applications with external input for automatic zero-point adjustments, qualified for periodical and recurring zero point adjustment
  • For indirect force and deformation measurements
  • With integrated amplifier with ± 10 V or 4-20 mA


Dynamic applications describe recurring, fast measurement cycles, as usually found in presses. In cyclic applications, it is important that the zero point is tared in regular intervals in order to minimize drifting of the measuring signal.

The strain sensors can be used for the following applications:

  • Indirect force measurement by detecting smallest strains allows efficient control of relevant process parameters (e.g., presses, assembly machines, welding machines, jigs, feed force)
  • Limit value monitoring to avoid overloads
  • Monitoring and documentation of process forces for increased process reliability (eg joining forces, assembly machines, pressing force, detection of tool breakage and wear)

The strain sensors from X-Sensors reliably measure even smallest strains on the surface of flat structures. Thanks to the strong and simple screw-on mounting, the measured values are more than comparable to glued strain gauges. Even more, because of the protecting housing, disadvantages of glued strain gauges are avoided. Thanks to the integrated, extremely low-noise and highly stable signal amplifier, the sensors have an enormous dynamic range.


The surface strain sensor X-113-8 monitors the strain between its two mounting screws and amplifies this mechanically. In this way the strain is concentrated in the measuring area and can therefore be measured using a resistive strain gauge bridge. The integrated amplifier provides a signal conditioning and delivers a linear, robust output signal. The solid steel housing and the robust design (IP64) guarantee problem-free operation, even under difficult environmental conditions.

Zero point adjustment

The zero point adjustment at these strain sensors is carried out by a digital zero adjustment mechanism. The zero point adjustment is not stored permanently, it is lost after a power off. It provides a non-volatile, stable zero point independent of cycle times. Therefore, it is qualified for all dynamic applications and can be used in all kind applications which require a periodical zero point reset, triggered by a digital input.

The reset input does trigger a zero point adjustment by the PLC. It is available with an “Active Low” and “Active High” Logic.


Data sheet – Strain sensor for dynamic applications – DigTara

X-113-8 3D-Step Datei

Scope of application

Strain sensor with scalable measuring range
Strain sensors with switchable measuring range are very flexible and universally applicable for different nominal strain ranges.

The option "switchable measuring range" was specially designed for a wide range of application covering: Four pre-calibrated measuring ranges (62.5 μm/m, 125 μm/m, 250 μm/m, 500 μm/m) can be selected with a digital input. mehr

Zero point adjustment of strain sensors
Installation-Zero und Process-Zero - Zero point adjustment of strain sensors at X-Sensors mehr

Strain sensor X-113-8

Unverbindliche Anfrage stellen

Bitte senden Sie mir ein Angebot für folgendes Produkt: Strain sensor X-113-8.

Ich beabsichtige dieses Produkt in folgender Anwendung einzusetzen:

This contact form is deactivated because you refused to accept Google reCaptcha service which is necessary to validate any messages sent by the form.

Schnellanfrage stellen

Schreiben Sie uns – Wir rufen Sie auch gerne zurück! Wir beantworten Ihnen gerne alle Fragen zu unseren Produkten.

    Ihr Name*

    Ihr Vorname*




    Ihre E-Mail*

    Ihre Nachricht

    Patrick Bernauer

    Patrick Bernauer

    Verkauf Endkunden / Distributoren
    Tel.: +41 52 543 19 66
    E-Mail: sales@x-sensors.com

    Bei Fragen zu unseren Produkten stehe ich Ihnen gerne zur Verfügung.

    +41 52 543 19 66

    Related products/accessories

    Strain sensor X-109-8
    Wide measuring range

    Strain sensor with M12 plug for high strains
    Strain sensor for dynamic applications for limit value monitoring to avoid overloads. Force measurement via strains in the frame of machines. With Process-Zero (cyclic).
    0-775 µm/m | 88x27x20 | ± 10 V or 4-20 mA
    With external input for automatic zero-point adjustments

    Strain sensor X-103-8
    Flat dimensions with
    four mounting screws

    Strain sensor with M12 plug and cable outlet
    Strain sensor for cyclic applications with external reset or tare control input for automatic zero point adjustment. Suitable monitoring and documentation of process forces for increased process reliability.
    0-360 µm/m | 93x25x13 | ± 10 V or 4-20 mA
    With external input for automatic zero-point adjustments
    You need help for selecting the right sensor?
    Please get in touch with us!

      Your Name/Surname*


      Your E-Mail*

      Patrick Bernauer
      Sales & Technical Support

      Tel.: +41 52 543 19 66
      E-Mail: sales@x-sensors.com

      Your message

      Please call me back