Strain Transducer X-118-2AX
particularly suitable for applications in harsh environments
Thanks to the 2-axis principle, the X-118 Dual Axis measures the occurring forces in two axes. On the one hand, this allows the occurring forces to be measured, while at the same time compensating for temperature-related strains. This means that accurate measurement results can be achieved even with temperature fluctuations. The Strain Transducer X-118-2AX is characterised by its extremely robust construction (IP68) and the high measuring range of up to 1500 μm/m. This makes the Sensor ideal for static applications. This makes the Sensor ideal for static measurements and force and weight monitoring even under harsh environmental conditions.
The strain transducers are ideally suited for use in the following areas:
The X-118-1AX Strain Transducer is quick and easy to install without the need for cables or solder joints. Even small strains on the surface of flat structures are measured reliably. The measured values are comparable to glued-on strain gauges, avoiding their disadvantages.
Properties
Thanks to its robust design, the Strain Sensor can be used in almost any environment, in any weather and even under water if required. Thanks to the robust design with IP68 protection, the Strain Transducer is particularly suitable for outdoor applications and also for mobile applications in heavy vehicle construction.
Mode of operation
The Strain Sensor X-118-2AX measures a load or force indirectly via strain. The Sensor detects the strain between the two screw-on surfaces and mechanically amplifies it in the Sensor. This concentrates the strain on the measuring point and can be converted into an electrical signal using a resistive measuring bridge. The output signal is proportional to the measured strain.
Details
measuring range | |
---|---|
Bauform / Montage | |
Anwendung / Tarierung | Cyclic Applications, Static Applications, Without integrated amplifier |
Ausgangssignal | |
Electrical connection | |
Feature | |
(K) Output signal | 1.5 mV/V |
(K) Messbereich (in µm/m) | |
(K) Cable length | 10.0, 2.0, 3.0 |
(K) Electrical connection | M12 – 5pol. Plug, open strands |
(K) Application | static |
We are happy to answer your questions about our sensors and find a solution for your application.
If you have any questions about our products, we are at your disposal.