Strain Transducer X-103-S15

especially suitable for applications with full bridge signal mV/V

For accurate measurements of strain

Strain gauge Sensors without an integrated measuring Amplifier are particularly suitable for applications where the full bridge signal mV/V is required or where several Sensors have to be connected to one measuring Amplifier. This can be the case, for example, when measuring the weight of silos and monitoring several tie bars on presses. The solid steel housing and the tight design (IP65) guarantee problem-free operation, even under difficult environmental conditions.

The Strain Transducers are ideally suited for use in the following areas:

  • Measurement, monitoring and control of forces in forming technology
  • Weight measurement on beams or supports
  • Measurement of smallest strains on rigid structures for analysis of mechanical loads

X-Sensors Strain Transducers reliably measure even small strains on the surface of flat structures. Despite the simple screw-on mounting, the measured values are comparable to glued-on strain gauges, while avoiding their disadvantages.

Properties

  • Reliable measurement of smallest strains for indirect force measurement
  • Very high output signal, high resolution
  • For cyclic and static force measurements with subsequent measurement amplifier
  • Extremely flat design of only 6.5 mm height
  • Simple and space-saving mounting directly on the construction surface

Measuring principle

How it works

The Surface Strain sensor X-103-S15 detects the strain between the two screw-on surfaces and amplifies it mechanically. This concentrates the strain on the measuring point, where it is converted into an electrical signal using a resistive measuring bridge.

Strain Transducers are very compact in dimensions and easy to install, regardless of the nominal forces. Since the Sensors are installed on the machine component outside the working space, they are an elegant alternative to conventional Force Sensors even when space is limited.

Technical specifications

measuring range

Bauform / Montage

Anwendung / Tarierung

, ,

Ausgangssignal

Electrical connection

, ,

Feature

(K) Messbereich (in µm/m)
(K) Input sensitivity (in mV/V)

1.5

(K) Output signal

1.5 mV/V

(K) Electrical connection

M12 – 4pol. plug, M12 – 5pol. Plug, open strands

(K) Cable length

1.0, 10.0, 2.0, 3.0

(K) Application

dynamic

(K) Mounting position

Closing force and mold protection, Load measurement at the yoke, Measurement on the frame/bracket

Contact us!

We are happy to answer your questions about our sensors and find a solution for your application.

    Name*

    Prename*

    Company

    Phone

    Zip*

    Mail*

    Your Message

    XSENSORS

    X-SENSORS AG

    If you have any questions about our products, we are at your disposal.

    info@x-sensors.com
    + 41 52 543 19 60
    Linkedin

    Compare