Universal measuring Amplifier
The measuring Amplifiers are suitable for universal signal conditioning of Force and Strain sensors with strain gauge full bridges.
They are thus suitable for amplifying the mV/V sensor signal from Force and Strain Sensors to control inputs.
Thanks to the compact housing, mounting can be carried out directly at the measuring point in a space-saving manner. This allows the strain gauge Sensor signal to be amplified into a robust standard signal (0-10 V or 4-20 mA) on the spot.
Measuring Amplifier for cyclic applications - Process-Tare
The zero point adjustment can be triggered via the control. If the reset input is pulled to >10 V, the signal is set to zero (reset) and the zero point adjustment has been performed.
Zero adjustment on these Strain Sensors and Amplifiers is performed by a digital zero adjustment mechanism, where the zero correction is permanently stored during operation. It should be noted that the zero point must be relearned in the event of a power interruption.
Measuring Amplifier for static applications - Installation-Tare
The zero point adjustment can be triggered via the control. If the reset input is pulled to >10 V, the signal is set to zero (reset) and the zero point adjustment has been performed.
Zero adjustment on these Strain Sensors or amplifiers is performed by a digital zero adjustment mechanism. The zero point adjustment is stored permanently, i.e. the zero point correction is available again even after switching off.
