Strain sensors with Process-Zero - For dynamic applications


Process-Zero for dynamic applications with automatic zero point adjustment
The zero point adjustment can be triggered via the PLC. If the input is pulled to >10 V, the signal is set to zero (reset) and the zero point adjustment is carried out.

The zero-point adjustment is carried out by a digital zero-point adjustment mechanism. The zero-point adjustment is stored within the sensor. But it should be noted that the zero point is not stored in the event of a power cut-off. ddd mehr

Strain sensor X-109-8
Wide measuring range

Strain sensor with M12 plug for high strains
Strain sensor for dynamic applications for limit value monitoring to avoid overloads. Force measurement via st...
0-775 µm/m | 88x27x20 | ± 10 V or 4-20 mA
With external input for automatic zero-point adjustments

Strain sensor X-113-8
Easy mounting with two screws

Strain sensor with M12 plug and cable outlet
Strain sensor for dynamic applications, with process tare Cyclic with analog signal path for fast response tim...
0-360 µm/m | 93x25x20.3 | ± 10 V or 4-20 mA
With external input for automatic zero-point adjustments