Yoke strain sensor X-103-S01-300
Particularly suitable for the smallest strains
For accurate measurements on the yoke
The surface strain sensor X-103 detects the strain between the two screw-on surfaces and amplifies it mechanically. This concentrates the strain on the measuring point, where it can be easily detected with a resistive measuring bridge. The strain sensor X-103 measures the load limits in the metallic structures of lifts through the deformation of the support structures. Mounting is uncomplicated on a free part of the load carrier structure. The strain transducer can be easily integrated into existing lift systems or installed in new installations.
To improve the quality of the measurement, it is possible to combine several strain sensors. The measurement signal is proportional to the payload in the car when installed correctly. The solid steel housing and the tight design guarantee problem-free operation, even under difficult environmental conditions.
Features:
- solid steel housing
- easy mounting with metal screws
- UL-approved cable
- Standard plug (DIN)
- Mounting material included in delivery
DownloadsMeasuring principle
How it works
The surface strain sensor X-103 detects the strain between the two screw-on surfaces and amplifies it mechanically. This concentrates the strain on the measuring point, where it can be easily detected with a resistive measuring bridge. The measuring signal is proportional to the payload in the cabin when mounted correctly.
Technical specifications
Details
| Anwendung | |
|---|---|
| measuring range | |
| mounting location | |
| (K) Mounting position | Load measurement at the yoke |
| (K) Cable length | 1.5 |
| (K) Electrical connection | M12 – 4pol. plug |
| (K) Output signal | -0.44 mV/V bei 100 µm/m |
Contact us!
We are happy to answer your questions about our sensors and find a solution for your application.
X-SENSORS AG
If you have any questions about our products, we are at your disposal.
Mit Erfahrung und Freude an Innovationen
