Strain Transducer X-103-S30
especially suitable for applications with full bridge signal mV/V
For accurate measurements of minute strains
A major challenge is to reliably measure small strains in rigid constructions, or machine frames. The measuring bridge of the X-103-S30 with four strain gauges features a particularly high sensitivity of 3 mV/V compared to conventional Strain Transducers.
The signal yield is twice that of conventional Strain Sensors. Specially developed for very rigid machine frames, even the smallest strains in rigid structures can be reliably detected. The solid steel housing and the tight design (IP65) guarantee problem-free operation, even under difficult environmental conditions.
The high signal yield enables a high resolution even with small strains. At the same time, no compromises have to be made in terms of speed, which allows the use in dynamic applications.
Properties
- Measurement of the smallest strains on rigid structures 🠒 Weight measurements
- Precise measurement of process forces (e.g. joining, holding, bending and pressing forces)
- Form and tool protection in forming technology
- Tool monitoring (monitoring of wear for predictive maintenance and for improved tool wear)
Compare this Product
Data sheet – Strain sensor with DMS output signal / without amplifier
STEP-File X-103-S30
Downloads
Data sheet – Strain sensor with DMS output signal / without amplifier STEP-File X-103-S30Measuring principle
How it works
The Surface Strain Sensor X-103-S30 detects the strain between the two screw-on surfaces and amplifies it mechanically. This concentrates the strain on the measuring point, where it is converted into an electrical signal by means of a resistive measuring bridge.
Strain Transducers are very compact in dimensions and easy to install, regardless of the nominal forces. Since the sensors are installed on the machine component outside the working space, they are an elegant alternative to conventional Force Sensors even when space is limited.
Technical specifications
Details
| measuring range | |
|---|---|
| Bauform / Montage | |
| Anwendung / Tarierung | Cyclic Applications, Static Applications, Without integrated amplifier |
| Ausgangssignal | |
| Electrical connection | 1 m cable with open strands, 3 m cable with open strands, 6 m cable with open strands |
| Feature | |
| (K) Messbereich (in µm/m) | |
| (K) Application | dynamic |
| (K) Cable length | 1.0, 10.0, 2.0, 3.0 |
| (K) Electrical connection | M12 – 4pol. plug, M12 – 5pol. Plug, open strands |
| (K) Input sensitivity (in mV/V) | 3.0 |
| (K) Output signal | 3.0 mV/V |
| (K) Mounting position | Closing force and mold protection, Load measurement at the yoke, Measurement on the frame/bracket |
Contact us!
We are happy to answer your questions about our sensors and find a solution for your application.
X-SENSORS AG
If you have any questions about our products, we are at your disposal.
Mit Erfahrung und Freude an Innovationen
