Yoke Strain Sensor X-109-S02-300
especially suitable for smallest elongations
For accurate measurements on the yoke
The strain transducers from X-Sensors reliably measure even small strains on the surface. Despite the simple screw-on mounting, the measured values are comparable to glued-on strain gauges, while avoiding their disadvantages. Thanks to the integrated, extremely low-noise and highly stable signal amplifier, the sensors can be used easily and universally. The solid steel housing and the dense design guarantee problem-free operation, even under difficult environmental conditions.
Properties
- solid steel housing
- easy mounting with metal screws
- UL-approved cable
- Standard plug (DIN)
- Mounting material included in delivery
Downloads
Measuring principle
How it works
The surface strain sensor X-109 detects the strain between the two screw-on surfaces and amplifies it mechanically. This concentrates the strain on the measuring point, where it can be easily detected with a resistive measuring bridge. The measuring signal is proportional to the payload in the cabin when mounted correctly.
Technical specifications
Details
| Anwendung | |
|---|---|
| measuring range | |
| mounting location | |
| (K) Mounting position | Load measurement at the yoke |
| (K) Electrical connection | M12 – 4pol. plug, open strands |
| (K) Cable length | 2.5 |
Contact us!
We are happy to answer your questions about our sensors and find a solution for your application
X-SENSORS AG
X-SENSORS
