Load Cell X-138-S
especially suitable for direct force monitoring in the force flow
For accurate measurement of compressive force
The Load Cell is suitable for universal use in industrial force monitoring and can be used for static and dynamic applications. Here, the force sensor is integrated in the force flow and directly measures the forces generated there.
The X-138-S measures precisely and accurately in the force range of 0.5 – 50 kN. The Load Cell has a space-saving size of Ø 50 x 25 mm. The Load Cell has a solid stainless steel housing with a sealed design according to protection class IP65. This guarantees trouble-free operation in different environmental conditions.
The force is applied centrally via the spherical force application button. Four threaded holes are provided on the underside for mounting the Load Cell.
Properties:
- With spherical force application knob (button) for force application
- precise measurement of compressive forces
- 4x M4 threaded holes on the underside for easy mounting
- Measuring ranges from 500 N to 50 kN available
Downloads
Installation and deployment
Electrical connection
The Force Sensors from X-Sensors are based on a strain gauge full bridge with strain gauges. The output signal for this Sensor is specified in mV/V. Various input modules of controllers already allow the direct connection of Force Sensors with strain gauge full bridge.
In addition, measuring Amplifiers with voltage output (0-10 V) and current output (4-20 mA) are available, which amplify the strain gauge full bridges accordingly. The measuring Amplifiers are available in a robust field housing, for DIN rail mounting or in an inline housing.
Mechanical connection / construction
The advantages of (button) compression Force Sensors are the simple mounting and the precise force application via the Sensor. This type of Force Sensor is always suitable when compressive force is to be measured. The flat design of the Load Cell has the perfect properties for installation in confined spaces. The various Force Transducers are universally applicable and are used in the areas of measuring and testing technology, industrial process control, press-in force measurement, machine control, special machine construction, tool construction and machine condition monitoring.
The installation of the Force Sensors with spherical load introduction knob is quick and uncomplicated. The Ssensor is screwed on from below on one side and then measures the force acting on the button. A special version for screwing from above is available. The surface on which the Force Sensor is mounted must be flat and sufficiently rigid so that it cannot deform during loading.
Technical specifications
Details
| Design / force application | |
|---|---|
| direction of force | |
| Feature | |
| measuring range | 0…0.5 kN, 0…1 kN, 0…10 kN, 0…2 kN, 0…3 kN, 0…30 kN, 0…5 kN, 0…20 kN, 0…50 kN |
| (K) Output signal | 1.5 mV/V |
| (K) Electrical connection | M12 – 5pol. Plug, open strands |
| (K) Cable length | 10.0, 2.0, 3.0 |
| (K) Measuring range (in kN) | 0.5, 1, 10, 2, 20, 3, 30, 5 |
| (K) Input sensitivity (in mV/V) |
Contact us!
We are happy to answer your questions about our sensors and find a solution for your application.
X-SENSORS AG
If you have any questions about our products, we are at your disposal.
Mit Erfahrung und Freude an Innovationen
