Load measurement Sensor XCS-131
especially suitable for new installations and modernisations of lifts
The XCS-131 series of load sensors is designed to be used in both new installations and refurbishments. The series covers the entire load range of passenger as well as goods lifts. The sensors are preferably installed in conjunction with a rope lock or deflection pulleys, as the mounting hole corresponds to the common threaded rod diameters. The installation is independent of the type of suspension means and can therefore be carried out for steel cables as well as for belts.
Properties
The sensors provide a high output signal and are effectively protected against overload with a mechanical stop. A wide range of accessories and evaluation devices are already available, making connection to existing control systems particularly easy. Accessories for safe mounting are already included in the scope of delivery.
Electrical connection
The sensors from X-Sensors are based on a strain gauge full bridge with strain gauges. The output signal of this sensor is specified in mV/V. Various input modules of controllers already allow the direct connection of force sensors with strain gauge full bridge. In addition, load measuring devices are available which connect the sensor to the control system.
Details
Anwendung | |
---|---|
measuring range | Payload 150 … 400 kg, Payload 200 … 500 kg, Payload 280 … 650 kg |
mounting location | |
(K) Measuring range (in kg) | 150 – 400, 200 – 500, 280 – 650, 300 – 750 |
(K) Mounting position | fixed point, rope load measurement |
(K) Cable length | 1.0, 2.0 |
(K) Output signal | 2.0 mV/V |
(K) Design | through hole |
(K) Electrical connection | open strands, Wago-connector733-105 |
We are happy to answer your questions about our sensors and find a solution for your application.
If you have any questions about our products, we are at your disposal.