Measuring Amplifier X-201-IN09

particularly suitable for universal measurement amplification

For signal conditioning of static and dynamic strain gauge sensors

The measuring Amplifier X-201-IN09 was developed for universal and simple commissioning. The zero point adjustment can be carried out via a button in the housing and via a control unit.

The X-201-IN09 is equally suitable for use in versatile applications:

  • Dynamic application with fast and recurring force cycles
  • Weight measurement / changes
  • Determination of mechanical loads in structures
  • Limit value monitoring and monitoring of mechanical loads to avoid critical conditions in plants and structures

The zero point correction is always permanently stored. At the same time, there is no limit to the tare cycles, which makes this strain gauge measuring Amplifier a true universal device for all applications.


  • Teach-in of the zero point with external reset or tare control input or via a push-button on the electronic unit
  • Zero point correction is stored captive
  • No limitation of taring cycles

Installation and deployment

The measuring Amplifiers from X-Sensors are suitable for universal signal conditioning of resistive strain gauge measuring bridges and strain gauge Sensors. They are thus suitable for amplifying the mV/V-Sensor signal of Force and Sstrain Sensors to control inputs. Thanks to the compact inline housing, mounting can be carried out directly at the measuring point in a space-saving manner. This allows the strain gauge Sensor signal to be amplified on the spot into a robust standard signal (0-10 V or 4-20 mA).

Zero point taring

Zero point adjustment is done by a digital zero point adjustment mechanism. The zero adjustment is permanently stored. This means that the zero point correction is available again even after switching off. Thus, a permanently available tare is available. The number of taring operations is unlimited.

The zero point adjustment is triggered via an external reset or tare control input. The mechanism is available with “Active Low” (< 3 V) and “Active High” (> 10 V) logic.

Electrical connection

The measuring Amplifiers are available with voltage output (0-10 V) and current output (4-20 mA), which amplify strain gauge full bridges accordingly.

Technical specifications

measuring range

, , , , ,


Anwendung / Tarierung

, ,


, ,


(K) Eingangsempfindlichkeit (in mV/V)
(K) Elektrischer Anschluss
(K) Ausgangssignal
(K) Gehäuse
(K) Anwendung

Contact us!

We are happy to answer your questions about our sensors and find a solution for your application.







    Your Message



    If you have any questions about our products, we are at your disposal.
    + 41 52 543 19 60