Load cells for elevators Archive - X-SENSORS: Sensor-Technologie

Load Sensor X-132

29. May 2020/in Measurement on the cabin floor, Elevator Technology Kraftaufnehmer, Elevator measurement, Load sensor Load monitoring Under cabin floor 0...800 kg/by eph

Load measurement under the booth floor with very high accuracy. With the X-132, both empty booths and overload cases are measured with high reliability.

Load Sensor XCS-131

27. May 2017/in Measurement at the fixing point, Rope Load Sensors for rope load measurement, Elevator Technology, Rope Load / Clamping Forces Kraftsensor, Rope load, Elevator measurement, Elevator sensor, Load sensor Load monitoring, Single rope load measurement Rope attachment Payload 150 ... 400 kg, Payload 200 ... 500 kg, Payload 280 ... 650 kg/by eph

Load measurement on the rope suspension of passenger and goods elevators. M12-M24 thread for easy installation.

Yoke Strain Sensor X-103-S13-300

29. October 2015/in Measurement at the yoke, Elevator Technology Dehnungssensor, Dehnungsmesser Load measurement on the beam / yoke On the beam / yoke Universal, for all load ranges/by eph

Strain transducer for load measurement on the beam with TTL frequency output.

Yoke Strain Sensor X-109-S02-300

29. October 2015/in Measurement at the yoke, Elevator Technology Dehnungssensor, Dehnungsmesser Load measurement on the beam / yoke On the beam / yoke Universal, for all load ranges/by eph

Strain transducer for load measurement on beam, mV/V signal output with solid steel housing. Easy mounting with metal screws. Mounting material included in delivery.

Load Cell X-130

27. August 2015/in Measurement at the motor frame, Elevator Technology Kraftaufnehmer, Kraftsensor, Compressive force indicator, Load cell Button compressive force 0...8 kN, 0...12.5 kN, 0...15 kN, 0...25 kN, 0…1 kN, 0...0.5 kN, 0...4 kN/by eph

Suitable for elevator load measurement and as a universal compression force sensor in the force range 0.5-25 kN. Dimension of 40 x 16 mm.

Evaluation Unit X-231

27. August 2015/in Interface / Evaluation unit, Elevator Technology, Load measurement system / Elevation system Interface, Signal evaluation, Evaluation unit Load monitoring Plastic housing Universal, for all load ranges/by eph

Configurable Load Measuring Interface (CLMI) with programmable digital switching outputs. Constant comparison between the measured load and the programmed limits.

Load Measuring Device X-232

27. August 2015/in Interface / Evaluation unit, Elevator Technology, Load measurement system / Elevation system Interface, Signal evaluation, Evaluation unit Load monitoring Plastic housing Universal, for all load ranges/by eph

Configurable load measurement interface with programmable switching outputs. Continuously compares the measured load with the programmed limits and activates the corresponding switching output if necessary.

Flat Load Cell X-133

27. August 2015/in Measurement on the cabin floor, Elevator Technology Elevator measurement, Elevator sensor, Elevator technology, Load cell Load monitoring Under cabin floor 0...16 kN, 0...25 kN, 0…10 kN/by eph

Flat load cell for mounting under the car floor, car frame or under the frame of the drive. Usable for a wide range of car and working weights. Solid steel housing and sealed design (IP67).

Joch-Dehnungssensor X-103-S01-300

27. August 2015/in Measurement at the yoke, Elevator Technology Dehnungssensor, Dehnungsmesser Load measurement on the beam / yoke On the beam / yoke Universal, for all load ranges/by eph

Strain sensor for load measurement on lift cabs at the yoke. The X-103 strain sensor records the strain on the screw-on surfaces. With solid steel housing for safe operation.

Tag Archive for: Load cells for elevators